IR THERMOMETER ( PYROMETER ) PCE-888

IR THERMOMETER ( PYROMETER ) PCE-888 IR THERMOMETER ( PYROMETER ) PCE-888 Infrared and accurate to within ± 1.5% , for measuring surface temperature without contact The PCE-888 pyrometer is ergonomic and easy to carry from one place to another. This light infrared pyrometer is attractive due to its size and its accuracy thanks to a visible laser pointer. It pyrometer was designed for industrial use and for professionals working in inspection and maintenance of heating systems, ventilation systems, air conditioning units, in the automotive industry, for electrical systems and fuse boxes, as well as for pilot installations and test positions. The pyrometer can be used in adverse conditions. It has a backlit LCD. The device has a visible laser to quickly and accurately target the area to be measured allowing for measurements to be taken at certain distances if the object being measured it hot or difficult to access. The emissivity can be adjusted between 0.1 and 1, and covers 90% of possible measurements taken. Please note that when measuring an object, the surface area being measured must be bigger than the surface area of the visible laser pointer. • Large backlit LCD with 3.5 digits showing a maximum value of 1999 • Shows readings in ° C or ° F • Auto shut-off, after 7 minutes of inactivity • Retains current values • Good ratio between distance and point of measurement of 8 : 1 ( approximate diameter of measurement point: 25mm at a distance of about 40cm, 50mm at 80cm, 100mm at 1.6m and 200mm at 3.2m) • Includes battery and user' s manual • Pre-installed mount for tripod Ratio between measurement distance and size of measurment point of 16 : 1 Technical specifications Measurement range -50 ~ 550° C Resolution 0.1° C ( between -50 and 200° C) 1° C ( between 201 and 550° C) Accuracy ± 5° C at -50 to -20° C, above range ± 1.5% of readings ± 2° C Response time