SOIL pH-Meter PCE-PH20S

SOIL pH-Meter PCE-PH20S PCE-PH20S pH Meter for soil PCE-PH20S pH meter for soil: using the PCE-PH20S Normally the electrode can penetrate the soil and measure the pH value showing the reading on the display ( see image on the left) . If a measurement needs to be taken that meets the DIN standard, or if the soil is too hard to be penetrated, then a DIN earth solution should be prepared and used to obtain an accurate reading. If this process is required, you can read or print the instruction by clicking the symbol on the right. Techncial Specifications Measurement range 0.00 to 14.00pH Resolution 0.01pH Accuracy ± 0.07pH ( between 5 and 9pH) ± 0.1pH ( from 4 to 4.9 and 9.1 to 10pH) ± 0.2pH ( from 1 to 3.9 and 10 to 13pH) Calibration automatic, depending on the calibration solution pH value of 4, 7 or 10 Electrode pH electrode to penetrate the ground surface Power 4 AAA batteries Operating conditions 0 to 60º C / < 80% r.h. Dimensions 180 x 40mm Weight 220g